logo new  

Marine peripheral devices

 

Uninterrupted power supply unit BBP2

The Uninterrupted Power Supply Unit is designed for:

  • generation of 24.5 V DC voltage from the ship’s mains 220 V AC, 50 Hz and uninterrupted power supply with a total current up to 8 A.
  • automatic change over from the Main Distribution Panel to the Emergency Distribution Panel.
  • automatic switchover to the emergency supply from batteries when the mains is off and vice versa when the mains is on.

Digital Heading Translator TKTs4

The unit transmits heading data to analog receivers (synchro heading receivers of different types). Parameters of output are set by software.

Distribution Box RK2

The Distribution Box RK2 performs transmission of heading data from the gyrocompass to repeaters and other digital receivers of heading.

Selector Switch PKTs1

The digital Selector Switch PKTs1 is designed to switch over the periphery to different heading sources.

Selector switch PK2

The Selector Switch PK2 is designed for switching over the control signals (4 lines) from the gyrocompass 1 and the gyrocompass 2 to the Heading Translator and Distribution Box.

Digital Course Recorder 23Ts1

The digital Course Recorder is designed for continuous automatic record and indication of the vessel heading. The course data is converted into visual information displayed on the screen of the device in the form of a graph of the course change over time.

Bearing Repeater 19-RShM3

The two-scale Bearing Repeater 19-RShM3 can be used as a gyrocompass heading display and together with a direction finder PGK-2 for determination of the compass directions of observed terrestrial or celestial objects and course angles reading. The unit is mounted on a pelorus and is installed on open deck.

Analog repeater 38-RShM3

The two scale Analog Repeater is used for a gyrocompass heading display. The LED backlighting brightness can be adjusted.

Digital Repeater 38-RTsM4

The Digital Repeater 38-RTsM4 is designed for display of a gyrocompass heading. In addition, the unit displays direction and vessel ROT. Indication brightness can be adjusted.

Pelorus 20-RSh1

Pelorus 20-RSh1 is used for installation and fixing of repeaters 19-RShM3.

Technical Data

  • Dimensions, Ø 460 х 1303 mm
  • Weight, maximum 26,5 kg
  • Protection level IP56

Pelorus 21-RSh1

Pelorus 21-RSh1 is used for installation and fixing of repeaters 19-RShM3.

Technical Data

  • Dimensions, Ø 440 х 415 mm
  • Weight, maximum 15 kg
  • Protection level IP56

Pelorus 22-RSh1

Pelorus 21-RSh1 is used for installation and fixing of repeaters 19-RShM3.

Technical Data

  • Dimensions, Ø 350 х 232 mm
  • Weight, maximum 8 kg
  • Protection level IP56


PJSC “Perm Scientific-Industrial Instrument Making Company
photonic2
106, 25th October St, Perm 614990, Russia

root@pnppk.ru